Peugeot Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
On my 308SW (2017) when I plug the driver's seat-belt in there is (sometimes) a delay of 10-15 seconds before the seat-belt light goes out.

Is this normal on 308SW's ? I've never had another car do this
 

·
Registered
Joined
·
462 Posts
I think the whole in car computer system is slow particulary a danger is putting the car in reverse and I'm already moving before camera comes in.
Dealer says nothing wrong.
 

·
Registered
Joined
·
888 Posts
If sound alarm occure it will be muted immediately after pluging seat belt in. Warning lamp stay on just for case ....
 

·
Registered
Joined
·
2 Posts
On my 308SW (2017) when I plug the driver's seat-belt in there is (sometimes) a delay of 10-15 seconds before the seat-belt light goes out.

Is this normal on 308SW's ? I've never had another car do this
I Just bought a 308 Active 1.6 and its the same, thought it was just mine. :thumb:
 

·
Moderator
Joined
·
6,587 Posts
I think its part of a european requirement or for NCAP even with seat belt buckled up on a majority of new cars the drivers seat belt warning stays illuminated for around 20 seconds on start up.

ON my DS the same applies if any passenger is in the car. The alarm will also sound but only if belt not buckled
 
1 - 8 of 8 Posts
Top