Peugeot Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
402 Posts
I have done it on my 2002 2.0 petrol, and a couple of HDI's without any problems, but it's not easy to tell exactly how to do it, i havent met two identical BSI boxes yet, but i havent (yet) met a 307 i coulden't fit cc to

Holt
 

·
Registered
Joined
·
214 Posts
Discussion Starter #8 (Edited)
Vpug can you explain the procedure please.

1. Obtain a stalk
2. Fit stalk
3. Program BSI (Thats the bit Im unsure about or have the hardware to carry this out)

Need to know someone with PP
 

·
Registered
Joined
·
402 Posts

·
Registered
Joined
·
402 Posts
If you mean stalk versions, i only go for the non-limiter version Peugeot number 6242 Z9
If you get the stalk from a scrapyard, the peugeot number isn't on the stalk, but a 10 digit number are located at the end of it, if you find one of these, they will be good 96538213XT or 96336889XT or 96637159XT

Holt
 

·
Registered
Joined
·
20 Posts
You may need the break pedal switch like I did, it can be found in the passenger footwell (on a RHD) car. I've put photo's on here on an old thread.

Andrew
 
1 - 13 of 13 Posts
Top