Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
If my car doesn't have cruise control standard and if I put a cruise control stalk in the space in the unit on the column and got the BSI programmed.
Will it work or would I need to do something more?
 

·
Registered
Joined
·
5,906 Posts
If my car doesn't have cruise control standard and if I put a cruise control stalk in the space in the unit on the column and got the BSI programmed.
Will it work or would I need to do something more?
Cruise control usually requires enabling in the BSI and the engine ECU.

If the car is a facelift the small display in the speedo will show CC when it's switched on. Pre-facelift cruise will only work if either of the first two cruise type options is selected but no information is displayed on the dash.

All cruise control retrofits that I've been involved with required a replacement brake switch. I've also read of some cars that did not have the cruise control options in the ECU's so it could not be enabled.
 
1 - 3 of 3 Posts
Top