Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
Hi,

I have some real trouble getting the pp2000 and the boxer to communicate togheter.

When pp2000 ask me if I have a 16 way diagnostic socket I just find a green 2 pin connector near the ecu and connects it and hit F4 (x), that leaves me with fewer options than if I had found the 16 way connector..

I then choose Ecu config -> test by ecu -> engines and automatic gear -> diesel -> check all engines, then it says choose engine and there is NO further options ! :mad:

When pp2000 ask me to turn on the ignition I do, and NOTHING more happens... the Ok button is dead..so they dont communicate because of the simple green 2 pin plug!

Can I locate the 16 way connector somewhere?
I really need some help!!

Is it possible to connect just the immobiliser to the pp2000?

Please look at he pictures..

The green plug, is this really the diagnostic plug for this car ??
ImageShack® - Online Photo and Video Hosting

The immobiliser
ImageShack® - Online Photo and Video Hosting

Wiring at the steering column
ImageShack® - Online Photo and Video Hosting

Wiring at the fuse section on the right dash side
ImageShack® - Online Photo and Video Hosting

Thank you ! :)
 

·
Registered
Joined
·
31 Posts
Discussion Starter #4 (Edited)
Hi, That would be great but apparently I do not have posted enough posts to pm anyone yet, my vin number is xxxxxxxxxxxxxxxxxxx, does that help you?

Sincerely Leon
 

·
Registered
Joined
·
31 Posts
Discussion Starter #5 (Edited)
Here is also a number I found on the chassis xxxxxxxxxx.
Anyone got the service box here who can check where the connector sockets are for sure ?

If I only could get the boxer and pp2000 to communicate then I would have a real chance fixing it.:thumb:
 
1 - 5 of 5 Posts
Top