Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter #1
Hi all.
I am going to install a small underseat subwoofer in my 2016 308 and would like to piggyback the front speaker cables from the glove box/ fuse box cable loom.
Does anyone know the colour for the front speakers?

I've searched high and low and I have got all the pin outputs of the smeg+, but I don't want to remove the head unit to get to it, or remove door panels.
I'd like to run one loom from the amp/sub to the glove box so would love to tap into the speaker wires there.

Any help would be appreciated :)
 

·
Registered
Joined
·
10 Posts
Speaker cable colours

Hi Blabladiebla

When I fitted uprated speakers to my 2016 308 the wire colours were as follows.
Drivers door main speaker - Pin 1 Grey & Pink trace = +
Pin 2 Cream & Green trace = -
Tweeter Pin 1 Pink = +
Pin 2 Cream = -

Passenger door main speaker - Pin 1 Blue & Pink trace = +
Pin 2 Cream & Brown trace = -
Tweeter Pin 1 Blue = +
Pin 2 Brown = -

If you are fitting a subwoofer I would recommend uprating the stock door speakers as well.

Good Luck
Kev
 

·
Registered
Joined
·
6 Posts
So is it better to take signal from touchscreen unit or somewhere else is possible ,I also think to put amp for all 4 speakers and active sub ?
 
1 - 3 of 3 Posts
Top