Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi, I’m new to this forum as I’m having an issue with selecting the part I need for my car and was wondering if any of you could help.

I have a 2008 Peugeot 308 it’s a 1.6 petrol engine, I’ve had it in for diagnostic today and he tells me I need a inlet camshaft dephaser. I cannot find this part I’ve also called 3 car part shops who don’t know what I’m talking about and Perry’s who sell Peugeot have told me there is either can shaft sensors or a solenoid valve.

So my question is do any of you know which part I actually need?
The codes it kicked out on the diagnostic are P0011 and P11a9
Any help would be appreciated.
 

·
Registered
Joined
·
22 Posts
This is what you need. But first clean it. You have 2 of these. 1 in the front of the engine and 1 in the back. Your error code tells that is the one from the back of the engine.
If after cleaning and clear error codes still appear try to change it with an OEM.
 

Attachments

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Thanks so much, just wanted to make sure before I bought random parts I didn’t need! I’ll take it back to the garage today.
Thanks again!
 

·
Registered
Joined
·
3 Posts
Discussion Starter #4
Ok, so I’ve had the solenoid changed and car is running better but only when cold. The eml still comes up with the same P11A9 and P0011 codes.
Is there something I have missed?
When the car gets to temp and has been turned off and back on again (say stopping at the shops or whatever) it will drive quite rough and cut out when slowing to a stop/turning corners etc.

Any help would be much appreciated!
Thanks
 
1 - 4 of 4 Posts
Top