Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
139 Posts
Discussion Starter #1
Well I just pulled the car off the drive, foot went to floor, fluid everywhere under the gearbox so I think it's safe to say the slave is buggered.

Where is it on a 2.0 110? Not a box off job is it? I did an astra recently and the slave was inside the bell housing which was a pain in the back side!
 

·
Moderator
Joined
·
6,095 Posts
External on front face of bellhousing nice easy job a couple of allen head bolts and a clip on the hose. Beaware that you do not loose the o-ring as there is often no replacement with the new cylinder
 

·
Registered
Joined
·
139 Posts
Discussion Starter #3
Well I just had a look and it's not actually the slave. It's the pipe which runs from the slave under the airbox.

Does anybody know the part number? as last time I ordered a part from pug it took them about 3 attempts to get it right.

It's a 2.0 hdi 110
 
1 - 4 of 4 Posts
Top