Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
437 Posts
Discussion Starter #1
Does anyone know how to change the clutch master cylinder on a 307 2.0 HDI 110?

According to Haynes it is removed from the engine bay but I cannot even see it due to the engine being raked backwards and all the plastic ducting for the turbo.

Am I going to have to tilt the engine forwards?

Any help or tips from people that have done it will be really appreciated.

Thanks people.

Pete
 

·
Registered
Joined
·
80 Posts
hi

hi there on these i think it would be easier from underneath the vehicle i think its location is where the clutch and brake pedals come into the engine bay
 

·
Registered
Joined
·
437 Posts
Discussion Starter #4
Hi I had a look from underneath and couldn't see it.

I then removed the wiper arms and trim and the bottom of the windscreen and as much of the turbo piping as possible to try and find the master cylinder and I can just about see it.

It does look like i will need to disconnect and engine mount or two and pull the engine forward.

I'm still interested to hear from anyone that has done a clutch master cylinder on a 307.

Cheers
 
1 - 4 of 4 Posts
Top