Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Hi. I'm just wondering what clutch I need to fit in my 307sw 110hp. It's had a SMF conversion so do I need a different clutch to when it had a DMF.
Thanks for any help.
Ant. :D
 

·
Moderator
Joined
·
5,827 Posts
Yes you will need a specific clutch dependent on how conversion was done. If a 90 BHP flywheel was used a std 90 clutch will fit, if a conversion flywheel was used it needs a SMF conversion clutch kit

On my dads 307 it was cheaper to swap flywheel to a used 90 one, as the conversion clutch kit was over £200 where a 90 clutch kit was less than £100 and secondhand flywheel was £35
 

·
Registered
Joined
·
14,527 Posts
As windy says you need to know what solid flywheel it has the standard 90 hp flywheel is not the same as a solid conversion flywheel so clutches differ slightly.

Some clutches for solid conversions are nearly as expensive as the whole kit !
 

·
Registered
Joined
·
11 Posts
Discussion Starter #5
Cheers guys. It has a flywheel for a conversion kit that was installed in 2014 but the clutch has become contaminated with gear oil and now slips.
Does the 90hp flywheel fit straight on to the 110hp?
 
1 - 5 of 5 Posts
Top