Peugeot Forums banner

1 - 1 of 1 Posts

15 Posts
Discussion Starter #1
This is solely down to the clutch cable not pedal
If this happens its the self adjusting pod on the cable.
You'll need to take the cable off and drill out the two plastic rivets to gain access to the self adjuster.
Once apart you will see a rod with flat side and two rollers roll down the outsides and lock when they get tighter.
There will be a tiny indentation on either side of the rod on the flat sides.
You'll need to use a dremmel and carefully grind out the indentations and make it smooth again.
Once done put it back together and replace the rivets with metal ones.
I did this approximately two months ago and all is fine.
1 - 1 of 1 Posts