Hi all i broken down in my pug called brakedown out he does test ect came back with fuel pump in tank not working i got new fuel pump and fitted it my self turned key over to start car but still not starting checked fuel pump relay is working ive got power coming from the plug that pops onto the fuel pump but still car want start and cannot hear the fuel pump priming
I struggled reading this. Punctuation marks like full stops, commas and capitalised letters at the beginning of sentences makes for a much easier read.
Hi I would check the pump you fitted first by checking power to the wires going to the pump I would then give the bottom of the fuel tank a wallop to try to hear the pump do you have a priming bulb too or is it just the pump
No i dont have that i have tank pump plus high pressure pump
i dont know if this is wired or not but i just went out to my car and it as started.Could there be any other problem that could be coursing this to happen
Only getting 10.5 volts to pump,iam sure it should be getting 12 volts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Peugeot Forums
609.6K posts
337.3K members
Since 2005
A forum community dedicated for all Peugeot owners and enthusiasts. Come join the discussion about performance, reviews, reliability, modifications, troubleshooting, maintenance, for all models.