Peugeot Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
hi i got 2003 206 quick sillver 1.4 16v with some rather anoying probs i.e horn not working and dipped headlight on intermit when car running and lights are off which is cutting in on indercator i have changed squib and still have same problem :mad:
 

· Registered
Joined
·
442 Posts
hi i got 2003 206 quick sillver 1.4 16v with some rather anoying probs i.e horn not working and dipped headlight on intermit when car running and lights are off which is cutting in on indercator i have changed squib and still have same problem :mad:
On the horn - first stop would be to check the connector and wires down by the horn . They're quite exposed to water spray and are known to often rot. Usual cure is to follow them back a bit to fresh copper and splice on replacement wires. Also verify that the horn itself is still working with some loose leads from the battery to the terminals on the horn.

Not sure what's happening with the lights from your description; are you saying that with lights switched off, you get the dipped beam blinking if you turn the indicator on, but with lights on it all works as supposed?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top