Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi peeps I'm new to this forum , I've scanned the topics but can't find what I'm looking for, I'm doing cylinder head removal on my 2.0. Hdi, I've drained coolant from bottom of rad hose , but I can't find the drain plug on the cylinder head, Ive got it jacked up,crawled underneath to get to the back of block, do I look at g/box end or cambelt end front or back of engine(boot or bonnet side), anyone got a pic of it, the only pic I've got is from my Haynes but I can't seem to find it on my engine, thanks for any help anyone can give me
 

·
Registered
Joined
·
1,912 Posts
best i can see is to the left of the turbo looking from front, sort of in a middling position on the block. it may be hidden by pipework and bits but try looking there. ooh i got 1.6 so ignore the turbo bit but still in a center point on front of engine. cant find drain plug on search but also check gearbox end right hand lower corner as you stand at nearside wing.
 
1 - 3 of 3 Posts
Top