Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter #1
Any hints on this appreciated, I'm tearing my hair out.

The spline head bolt holding the speed sensor is frozen, I stripped the head trying to remove it. So I drilled it out -almost.... The drill bit broke inside the hole. Using a mini grinder, I cut a slot in the plastic plate of the speed sensor, between the bolt and the sensor itself and seperated the plastic plate. My plan was to remove sensor, then have more space to get vice grips on bolt head to remove it.
Problem: I can now rotate the speed sensor and lift it about 1mm but it will not come out! I'm aftaid if I force it I wil break something off inside the tranny because the thing is only plastic.
help please?
 

·
Registered
Joined
·
42 Posts
Discussion Starter #2
solved, I cut it off with a grinder. then drilled a new hole in the tranny case beside the bad one then bolted new thing in place.
it works
 
1 - 2 of 2 Posts
Top