Peugeot Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter #1
1.The very first step is to unplug the diagnostic tool from the vehicle.
2.Make sure all the gadgets are switched off, the driver’s window lowered down and open the bonnet.
3.Then close all the doors and take off the key from ignition.
4.After a 3 minute interval, unplug the vehicle’s battery terminals and wait for a further 15 seconds.
5.Attach back the battery terminals and give a 10 second pause making sure the doors are closed.
6.Turn the side lights on.
7.Now turn the engine on and inspect the system functioning. does this mean start the car ?
8.Press and hold down the lock button on the key for 10 seconds.
9.Check the central locking system by unlocking and locking the door consecutively. with the key or the button on dash?
10.Turn the engine on again and finish inspecting the system
points 789 I need to clarify?
 
D

·
Guest
Joined
·
0 Posts
No need to turn lights on. Just disconnecting and reconnecting the battery resets the bsi anyway.
Yes 7,8,9 start car. It
 

·
Registered
Joined
·
121 Posts
Discussion Starter #7
thanks gibbo,at the point where it says Switch on the ignition and check system's functionality,do you actually check your wipers work lights, blowers etc...
 
1 - 9 of 9 Posts
Top