Peugeot Forums banner

BRAKE PROBLEM

871 views 3 replies 3 participants last post by  Hermano 
#1 ·
I hope I am in the right places my brake pedal is hard with the engine off and when I drive the pedal is also hard and stopping is really poor I have checked all the usual things and can't seem to find anything wrong I suspect the servo but not absolutely sure, can anyone help
thanks Reddington
 
#4 ·
Sounds like loss of vacuum for the servo somewhere. Get a vacuum gauge and check the vacuum starting at the pump (if a diesel) then move methodically downstream disconnecting hoses and checking vacuum at various points until you locate where the loss is taking place. Once you know that then you can proceed accordingly.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top