Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hiya peeps...totally new to pugs and loving them...just bought poppy the pug and cpl niggles that I hope forums can help with..2004 plate 5 door 90ps 307 1.6 hdi...when you brake at higher speeds you can feel a judder/vibration through steering wheel...should add that its not coming through pedal and abs light functions on start up then never seen again...as an old school car person id say replace discs all round but anyone else had similar? Not checked runout on discs but fronts look newish,rears have slight wear ridge...thanks peeps..
 

·
Registered
Joined
·
912 Posts
Distorted front disc for sure.When changing both make sure all pistons,sliders etc are free and the new pads "copper slipped".
While your at it just make sure ball joints,bushes etc are in good condition.
 

·
Registered
Joined
·
912 Posts
Cheers......may just do all four as cheap enough on ebay or false economy?
It all depends? the fact that yours have distorted could be they are cheap low quality parts??
Suppliers like GSF & ECP can supply top quality O/E brakes at very competitive prices.If your lucky enough to have a depot near,you can make sure they are the correct parts over the counter with no postage.
You may be asked the diameter of the front disc and the make of caliper.Also your 307 could have rear discs that come with hubs and bearings,one lump.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #5
Cheers...discs all round gsf somewhere up here so ill pop in...rather pay extra and reliable brakes.
 
1 - 5 of 5 Posts
Top