Peugeot Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
48 Posts
Lee, I have just replaced the discs and pads on my 206 1.4 hdi sw. The parts cost from the dealer £120.00, not much when you consider the safety factor of having good brakes. if you cannot do them your self get your garage to replace the brake discs and pads, if you are doing them your self you will need a set of torx star sockets and a torque wrench. The torx sizes must include a TX55 and TX25. these hols the discs to the hubs and caliper to the hub. It is a fairly straight forward job. A haynes workshop manual might be a good investment. hope this helps cheers Nick
 
1 - 1 of 1 Posts
Top