My old Delphi diesel pump started leaking from the shaft spindle , soaking the cambelt, so I decided to go down the trusty old Bosch route !!
After two unsuccessful attempts I finally managed to get a pump off a 306 1.9 ..hurrah!
Fitted and fired up ..brilliant !!
One small problem the pump pulley and camshaft pulley are ever so slightly out ..causing the belt to run off slightly ..see pics ..I've checked everything ..it's really puzzled me !
Its because the DW engine and the XUD engines are actually different blocks and the pump brackets are bolted in a different position same bracket same head even but blocks are different casting and angle if you look closely there are many differences the DW is more like an HDI block than an XUD block.
Hello all
More of a question but has anyone modified a 270 BHP 308 GTi? I've seen a few bits and pieces you can buy and I don't think it will be for a while yet (I'll enjoy it as standard) but looking for some inspiration/simple mods that can be done (besides the obvious intake/exhaust/remap etc)
Hi guys,
I want to put a bov on my 2003 2.0hdi 307 diesel purely to make the sound, I don't really care about increased performance.
I'm not really mechanically minded and normally ride a bike and was wondering the process it would involve or any issues it could cause, my username says it all...
hi, Looking for advice on EGR.
I have a 2013 Partner 1.6HDi 93hp (only 22,000miles) and am looking to disable the EGR.
I have seen there is the golf tee capping the vac line and there is also using a blanking plate.
As far as I am aware the EGR opens at low revs and closes somewhere over...
I have changed the car adjustable ECU. It is connected to the original connector. The ECU is CAN bus compatible. Do I need to change the bsi settings with the pp2000 tester? The problem is now economy mode active. The charging light is on even though the charging is working! The car has been...
Hello, I need technical information on the Grip Control.
I have a 3008 without this option and would like to install it,
I recovered all the electrical and coverage components but before proceeding with the purchase i would like to know if modifications to the control unit are necessary.
has...
A forum community dedicated for all Peugeot owners and enthusiasts. Come join the discussion about performance, reviews, reliability, modifications, troubleshooting, maintenance, for all models.
