[andybellTT]

Bolts that hold the caliper to the caliper bracket.

Hi,

Peugeot 206 1.1 2005

I've been stripping my brakes down to try resolve an irritating squeak and in doing so have rounded off one of the 13mm bolts that hold the caliper to the caliper carrier.

Does anyone know the specific type of bolt I need to replace it with? I've done a bit of searching but I can't find out.

Also, does anyone know if you can buy the caliper carriers separately or does it come as part of a new caliper?

Thanks in advance, Andy

 

[jimmymarsbar]

Have a look at the image attached, is it item 9 that you've rounded off?

It's a 12mm head. I'm guessing it was well rusted, meaning a 13mm felt like it fit perfectly.

 

[andybellTT]

Hi,

It actually looks more like the bolt shown in section 4, its the bolts that go into the sliding pins.

The bolts in section 9 are actually a T55 torx fitting for my car....

 

[jimmymarsbar]

The guide pin bolts are usually supplied with pads. GSF or ECP will probably have some for sale

 

[andybellTT]

OK, thanks.

 

[andybellTT]

Is there any sort of guide pin fitting kits you can get?

The discs and pads are fine but one of the pins seems a little stiff. Or can they be refurbed? Taken out re-greased and fitted again?