Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,467 Posts
to bleed you take the top off the fluid and turn the steering a few times including full lock to get any bubbles out. if its drawing air in it may not cure it at first

the stop leak may work. i used the radiator one before and it worked ok
 

·
Registered
Joined
·
15,377 Posts
Power steering does NOT need bled other than as described above it is self bleeding just pour in the stop leak and hope it seals it but 307 pumps are a little fragile so stop leak MAY harm the internals not sure never tried :)
 
1 - 5 of 5 Posts
Top