Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
hello all
ive a 2011 bipper, got towbar fitted and apparently theres a quick fit wiring connecter. I had already wired it straight and all is fine except for brake lights, when brake lights are on the trailer ones go out in 1 second and so does the p/s one on van, doesn't blow bulb or fuse.
any help greatly appreciated
 

·
Registered
Joined
·
2,337 Posts
When you say you wired it straight, you mean you wired the additional lights direct to the existing loom?
If so it's hardly surprising you have problems. You should fit a bypass relay.

You can alternatively buy the Peugeot loom for a towbar - at a price. That does plug in, but not to just one place normally.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
Hi Brian, thanks for the reply, never had any probs before with st8 wire. apparently theres a bsi box behind fusebox and its meant to be wired from their. kinda baffled by all this
 
1 - 3 of 3 Posts
Top