Peugeot Forums banner

1 - 3 of 3 Posts

·
Moderator
Joined
·
5,090 Posts
Discussion Starter #1
Is it possible to enable aux 2 on my 2006 sw and keep my bluetooth function ?? there seems to be differing views on this so thought i'd ask on here.
Also we did try a few weeks ago to do this but didnt have a lot of time and needed to repair my car so didnt achieve anything. IIRC we went into the radio (rd4) configuration and something was reserved for what we think was bluetooth so left that as was.
Any tips, or a step by step idiots guide would be nice if anyone fancies it.
 

·
Registered
Joined
·
5,928 Posts
It could be possible if the pins for AUX2 are not already in use in the plug that goes into the AUX connector in the back of the RD4. You could connect the existing wires and the new aux wires into the same plug.

I had something similar when I wanted to plug a usb / sd card interface into the CD Changer port. There was already a plug with a single wire coing into the CD Changer port. The same pin on the interface wasn't in use so I removed the wire from the existing plug and put it into the plug from the interface and all is working fine.
 

·
Moderator
Joined
·
5,090 Posts
Discussion Starter #3
It plays mp3 so I think ill just stick to that,away on holiday in a couple of weeks so starting to think music etc. Thanks for reply

Sent from my K013 using Tapatalk
 
1 - 3 of 3 Posts
Top