Peugeot Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter #1
hi guys what would cause the anti roll bar to move about 1"-2" to the right until it rubs on the subframe . I have change shocks all joints and bushes and driveshafts , drop links , ball joints , wishbones ,arb bushes . but after about 50 miles it shifts . it's on a 307 2.0 hdi 110
 

·
Registered
Joined
·
187 Posts
Discussion Starter #4 (Edited)
i think I know why the arb keeps moving***. I have just looked on Peugeot service box and it states that the arb bushes are suppose to have to flat edges inside and which fit with the flats on the roll bar I put uprated bushes which said they where for the car but don't have them . so it doesn't stop lateral movement

but I have had a full wheel alignment
 

·
Registered
Joined
·
213 Posts
Just had the same problem, old bushes had no flats. New bushes did and it's not moved now for 2 weeks. Also found that there was 3 sizes, mine was 21mm dia.
 
1 - 6 of 6 Posts
Top