Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Looking for advice or suggestions,
Petrol 1.6 16v (120)
58 plate
65,000

Anti pollution and EML, showing:
P0341 Inlet Cylinder Reference Sensor Signal Coherence

I have changed what I believe to be the inlet camshaft position sensor (the rear most one) although I've seen a video stating it's the front one?

Anything I can check? Any way to check the timing with a diagnostic machine?
I'd much rather it be something simpler than the timing being out a tooth or so.

I'm confident mechanically however, competence may be another story.

Any advice or suggestions appreciated as I have a 3 hour drive on Monday.
 

·
Registered
Joined
·
870 Posts
would be ideal to change the chain at 65k, but i would be having a look at valve timing.You will need the lock set to do it.
could be so many things causing the problem chain/guides/tensioner/sticky pulley/solenoid.

i would remove clean the rear solenoid first,easy enough, just remove air filter/housing and throttle body pipe

and yes inlet is the rear sensor.
 
1 - 2 of 2 Posts
Top