Peugeot Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
How do you get to the fuses behind the glove box on a 5008 ? There is a video posted somewhere how to reveal the fusebox but the car is a left hand drive and you just pull the panel cover off !
Thanks,
Paul
 

·
Registered
Joined
·
56 Posts
Discussion Starter #4
Right chaps,got access to the fuses behind the glove box and looking at the fuse diagram,
Fuse F2 is unused.
Should I use that for the dashcam or should I piggyback onto something like the rear wiper or trailer presence/rain sensor ?
Thanks,
Paul.
 

·
Registered
Joined
·
441 Posts
Right chaps,got access to the fuses behind the glove box and looking at the fuse diagram,
Fuse F2 is unused.
Should I use that for the dashcam or should I piggyback onto something like the rear wiper or trailer presence/rain sensor ?
Thanks,
Paul.
If there's the female terminal (bit that grabs onto the spade terminal/contact of the fuse) on both sides of the fuse slot (so that the piggyback isn't wobbly, I'd use it. (As unused, it might be that the 'outgoing/downstream' side isn't populated with the contact/terminal, not sure how exactly they do things now.

Otherwise I would probably use the fuse that feeds the cig.lighter socket.
 
1 - 6 of 6 Posts
Top