Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,548 Posts
Discussion Starter #1
Hi

Anyone know the correct torque setting for the bolts that are used on the 17" Rubis alloy wheels?

Wheel bolt in question is part number 5405 67.

The owners handbook is really helpful with the following advice " Have the tightening of the bolts and the pressure of the spare wheel checked by a Peugeot dealer or a qualified workshop without delay. "

I'm fitting the 308 mudflaps which means I need to remove then refit the wheels & would like to torque the wheel bolts up correctly.
 

·
Registered
Joined
·
27 Posts
If I remember correctly I have those alloys and was told by my garage to use 110Nm for this ones.

So every time I change the wheels (2 times a year) I have since used 110Nm as the torque.
 

·
Registered
Joined
·
2,509 Posts
I tend to do all wheel bolts up to a torque that will permit me to undo them at the roadside should I get a puncture. I've never lost one yet.
 
1 - 3 of 3 Posts
Top