Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi,

I've had a look around, but couldn't find an issue like this one.

The airbag light is lit on my 807 Exec.
I've connected PP2000 and the following was found.

Permanent fault. Left side modules triggers and left side curtain airbag in production. Open circuit.

Impact recorder: 15
Neutralisation switch status: On
Side air bag status front LH: Error
Front pre-tensioner status left: Error
Side curtain air bag status left: Error



In your opinion are these due to a single point of failure or is the left side quite broken?!

The previous owner advised that in an attempt to get rid of the warning light they got a garage to replace the curtain airbag..obviously this was unsuccessful.

Thanks
 

·
Registered
Joined
·
1,054 Posts
Looks like a break in the wiring close to the airbag module, I'd download the wiring diagram from Peugeot Infotec and then disconnect module and airbags and test wiring for continuity between the plugs and also closely inspect the pins on the plugs closely.
 
1 - 3 of 3 Posts
Top