Peugeot Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter #1
307 1.4hdi

Hi

My air flow readings on pp are way above the air flow setting parameters , i have fitted another air flow meter and they are even higher. should the readings be near the set parameter reading ?
 

·
Registered
Joined
·
108 Posts
Discussion Starter #2
ive seen screen shots on here of peoples live data and there live readings are nearly same as the set parameters ,.


from this im assuming ive got a problem with maf ?

is this correct ?

thank you
 

·
Registered
Joined
·
108 Posts
Discussion Starter #6
ive had new filters . air and fuel

new pipe between air flow meter and turbo

fuel pipes under airbox replaced

leak off test done on injectors ( no problems )

new egr valve fitted

had it on peugeot planet only fault is for injector coding failure ( i have never tried coding them )

only thing ive noticed on pp is no readings for turbo and air flow actual readings on live data are way above the parameter settings
 

·
Registered
Joined
·
9,733 Posts
Just need the numbers of the top of injectors to recode them , its easy with pp2000 , they are numbered 1 to 4 from passenger side to drivers side :thumb:
 

·
Registered
Joined
·
108 Posts
Discussion Starter #8 (Edited)
i have tried coding them on pp this morning but kept getting communication error

these are live readings at 2000rpm IMAG0233.jpg


as you can see measured air flow 412 is way above air flow setting 255

and at bottom it says 2000rpm no load it should be 211

i have no idea if these reading are high or not .

no fault code on pp apart from the injector coding
 
1 - 8 of 8 Posts
Top