Peugeot Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
87 Posts
Discussion Starter #1
Heya, I got a 3 door 207, and was wondering if its possible to add one-touch up and down window switch like on the drivers side? If so how would i achieve this?
 

·
Registered
Joined
·
1,036 Posts
I've done it to both my 405 & 206 before.

405 used a different switch & a seperate control unit for the one touch feature.

206 has all the one touch stuff contained within the switch.

405 I added a pair of switches, wiring & control unit to gain one touch passenger window.

206 I fitted an aftermarket total closure unit to the factory deadlocking system. The total closure unit also has one touch window controls built in.

You really need to have a look at the circuit diagram & see how the one touch feature is designed & operates on the 207.
 

·
Registered
Joined
·
87 Posts
Discussion Starter #3
Could you point me in direction that I should look at? Would I be able to pull required bit out of another car? As I'm heading down to the scrappy sometime soon for a couple other things.
 

·
Registered
Joined
·
1,036 Posts
You need to find out where the one touch components are that control the window.

They could be inside the switch.

There could be another control unit for one touch.

One touch could be part of the BSI software.

You need to look at the circuit diagram for the one touch feature to see how it works on a 207.
 
1 - 7 of 7 Posts
Top