Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
hello


I have some questions. Is it difficult to add addative yourself in a partner 2012 1.6 hdi? and what usually difference pressure on dpf. .Has had trouble with the car warning that it is getting clogged but after regeneration I saw that the add-on bucket was 10 ml so it needs to be filled enough.


Sorry for my bad english.

Regards
Andreas
 

·
Registered
Joined
·
15,377 Posts
Additive once filled needs reset using diagbox as it wont see the extra added unless you tell it so i would refill tell it its had a refill then run it for a couple of regen cycles and see what the dpf settings are after that.

You MAY have to remove DPF and wash it out then tell the computer its been replaced to fully cure the issues.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Okay. Perhaps better to let peugeot add up the addativ then?

The problem is gone after i did 2 regenerations on the engine but it was then i saw that addative level was only at 10ml.

When I run now the difference pressure on dpf is between 10 to 28 mbar, is it okay?


Really appreciate all the help I can get on how it should be.It makes the troubleshooting so much easier


Best Regards
Andreas
 
1 - 5 of 5 Posts
Top