Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Hi
On the picture bellow which actuator is responsible for letting hot air to the cabin ?
A white flap (no.3) is rotating when I need to change air flow bottom/driver/windscreen/auto and I can hear it is working.But I can not get any hot air :(
Is no.1 for hot air and no.2 for cold or is it no.1 left side no.2 right side ?
cheers
 

Attachments

·
Registered
Joined
·
149 Posts
Do you have dual climate?

Not sure what your no 3 is....

The actuators you have labelled no1 and no2 will control air direction and hot/cold. Not sure which is which on your pic or which side of car we are looking at, another pic zoomed out a bit might help.

The higher of the two actuators does the air direction and the lower one does the hot/cold.
 

·
Registered
Joined
·
8 Posts
Discussion Starter #3
Thanks for answer.that photo was made from passanger side and the no3was a flap which was moving when change air durection.I belive it has got an actu.ator on the opposite side.the thing is you can only see a little bit of it and I can not be sure if the flao is working properly.But before blaming flaps I am gonna check actuators.
 
1 - 3 of 3 Posts
Top