Peugeot Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
hey all. Cleaned my rear abs sensors at the weekend but still have the light on the dash should it go out on its own or do i have to get it plugged in to clear it
 

·
Registered
Joined
·
3,426 Posts
as soon as i did mine i started up and the light came on, about 10 seconds later it went off and its been like it since

it will be stored in the memory but i will erase when i have access to the computer
 

·
Registered
Joined
·
12 Posts
Discussion Starter #7
my light is still on. cleaned the plate where the sensor sits and set them to about 1mm away from the hub. last time i had it plugged in it did say that both rear sensors were showing an "open circuit"
 

·
Registered
Joined
·
65 Posts
Have just had my n/s rear abs sensor replaced, not cleaned ,was told there could
Be a breakdown in the wire. Light went straight out when started up.
 
1 - 9 of 9 Posts
Top