Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter #1
I thought I would post this as it might be helpful to the others. When I bought my 307 it had an ABS fault. I read the codes using Peugeot Plant and it reported that the rear left sensor was reading open circuit. I found the wiring has fallen down and melted itself to the top of the exhaust
 

Attachments

·
Registered
Joined
·
121 Posts
Discussion Starter #4
Luckily I was able to carefully solder a new length of wire to the tiny stubs. A quick bit of heat shrink and it was good to go. The ABS fault cleared once I took the car for a drive
 

Attachments

1 - 4 of 4 Posts
Top