Peugeot Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hello, I have a 2012 308. In November I had all of the breaks replaced and new tires put on. In January I started to get the ABS fault warning when I would first start up the car but now it stays on. There is also an ESP light on.

The car drives fine. Could this be a sensor issue? I read something about the break light sometimes being the issue but it seems to be working fine.

Any help is greatly appreciated!
 

·
Registered
Joined
·
15,377 Posts
Its not the brake light that can be an issue its the brake switch.

ABS and ESP are both part of the ABS system hence both are showing a fault have you had tracking done or any work involving the steering as this can also cause these faults to show.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #5
Thanks for the advice! So you think even though the work was done in November it could have taken the warnings a while to
come on? Would it be worth bringing it up to the garage that did the work? Or is it something easily fixed on my end?
 

·
Registered
Joined
·
15,377 Posts
Yes as above you need to KNOW what is wrong not guess i was giving possible reasons based on your description you need planet to reset steering sensor anyway so just get a planet reading done.
 
1 - 8 of 8 Posts
Top