Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
264 Posts
Discussion Starter #1
So I've got no communication between the ABS module and the BSI. It's setting off all other sorts of faults too, like airbag, no speedometer, etc..

Just wondering if anybody has some quick tips on what to check first, or any idea what might resolve it (assuming the ABS module isn't actually goosed!), such as vacuum lines, fuses brake switch, etc? IE, what would you check first?

I think I may have one or two faulty brake sensors, as I replaced the back one last year with a cheapo one, and it broke again last month, and then the front one started glitching a few weeks ago. This did interfere with the speedometer when it glitched, but not the airbag. I'm thinking it'd be too much of a coincidence that the ABS module now died a month after these..

Unless the ABS module was slowly dying and not reading the sensors correctly. I do also now have a low brake fluid warning as well, but I assume it's to do with this.

At the moment the car is like a disco when I switch on the ignition, with all the lights and sounds..
 

·
Registered
Joined
·
37 Posts
I did see somewhere where someone had the same kind of fault as you, it was to do with one of the connectors in the fues box under the bonnet where one of the pins was Broken of, check fuses to, will have a look and see if I can find it
 

·
Registered
Joined
·
264 Posts
Discussion Starter #4
I did see somewhere where someone had the same kind of fault as you, it was to do with one of the connectors in the fues box under the bonnet where one of the pins was Broken of, check fuses to, will have a look and see if I can find it
Nice one.
I just started that video, but I'll finish it tomorrow and check it out. I did pull all the fuses recently, trying to find a battery drain, so hopefully it's something similar, or a loose connection or something.

I do have a spare fusebox somewhere as well, from a "throwing parts at it" scenario, so it'd be great if I can finally make use of that!

I don't care what the problem is once it's not the bloody ABS module!
 

·
Registered
Joined
·
264 Posts
Discussion Starter #5
OK, so I'm feeling like a right idiot now. I checked the main ABS connection on the ABS module and it was disconnected!
I either forgot, entirely, to reconnect it, or I didn't push it on all the way before I clipped in the white "slidey" fastener. Duh!

At least the car no longer sounds like a disco when I get start it up, which is good.

I still need a front left ABS sensor, so I'll pick one of those up soon, but that was acting up before I disconnected the module. The speedometer was randomly not working, and I assumed it was because of the left sensor, but just now I connected up to PP and the speedo was working, while the ABS sensor wasn't, so I'm not sure what's going on?

I assumed that the speedometer worked by having both front wheel sensors reading roughly the same speed, but if one of them isn't working then that theory seems to be out the window.

Anybody know what, exactly, where the speedometer reading comes from?
 
1 - 5 of 5 Posts
Top