Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
hi i have a 807 and it needs rear lower arm bushes replacing .just wondered if anybody out there has replaced them and how difficult or easy were they to replace .thanks .
 

·
Registered
Joined
·
14,941 Posts
They are a nighmare to do make yourself a whole day free :)

Easiest way is drop front of axle and burn the old pushes out if they are not already falling out then you need to cut the outer sleeve out the hole somehow then the new bushes are a tight fit so you need to press them in its not a fun job.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
thanks for the info .well the bushes are well worn and will be easy to remove thats if they dont fall out first .but its the replacing that worries me . will have to make up a press with some studding and a couple of sockets plenty of cleaning and lube to get them in as easy as poss . its just i dident want to have to remove the whole rear axle from the car :eek:,just drop the arm from the chassis .thanks
 
1 - 3 of 3 Posts
Top