Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
Hi,
The "button" for the O/S door has become loose & I don't see any easy way to relocate it back into a working position. I expect the the pack needs to be replaced. I see these on ebay for about £30 but wonder what is required to replace it.
There is a screw in the "coin pocket" of the plate & wonder if undoing that would release the plate allowing it to be lifted, the electrical connections taken off and replaced with the new one. Or are there fixings within the door.

Before I purchase a new plate and go any further any advice would be much appreciated.

Thanks
 

·
Registered
Joined
·
42 Posts
If it's the same as the earlier 607 like mine (four window switches, isolator, and mirror control), then there is on screw under a small cover in the door pull. It's then held in with some metal clips, which sometimes get stuck.:rolleyes:

Once removed, the main part of the switch might just clip back into the surround, or might need a spot of glue if any of the tags have broken.
 
1 - 3 of 3 Posts
Top