Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
365 Posts
Discussion Starter #1 (Edited)
That is the part number of a CC Anti Roll Bar.
Using the highly scientific method of searching ebay, and checking compatible vehicles, I have an idea that any diameter of said part number will fit my 03 2.0 HDi 90.
Am I correct, or is a CC listed one strictly CC?
I have found a cheap 24mm one, and I want it, but do not want it if it is totally different.
If I am right, I am going to buy it, and then order poly bushes to suit.

Thanks for your help,
Neil

My standard one is 5081E7
 

·
Registered
Joined
·
718 Posts
is each component for each model in SB drawn to show the exact thing, or are they generic images that are shared across each model that has similar parts do you know?
from what i have seen so far the images are of the exact part and not generic.
both that ARBs look identical to me except for the diameter

Terry
 

·
Registered
Joined
·
453 Posts
The 24mm ARB will give you stiffer anti roll qualities.
Smaller engined will have a smaller diameter ARB due in part to the engine weight and possibly tyre width.
Eg say - 1.1 ltr 22mm and a 2.0ltr 24mm
If you put your chassis code into service box it will tell you the correct diameter ARB for the car - remember to get the correct bushes to match.
As far as I'm aware from my little experience the ARB's for 307 models are the same shape/profile just the diameters are different.
 
1 - 5 of 5 Posts
Top