Peugeot Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
hi all i have a 06 plate 407 2.0 hdi se with cloth manual seats and like many others i want to fit electric half leather seats.i have read lots of posts on various forums most of which are inconclusive.some say the loom may be already under the carpet others disagree some say even if the loom is there the ecu wont be or it will need reprogramming with pp2000 etc.
my question is if the airbag loom/plug is the same or the plug can be swapped over what is to stop the electric motors bieng wired up with a positive and negative feed with a suitable fuse?
a few years ago i did a similar swap with a vauxhall omega electric leather for manual cloth seats no wiring was present so all i did was run a power feed in with a suitable fuse and they worked perfectly the only function not available was the memory setting.i dont know where i will get the power feed from but proberbly from the battery any body have ideas on this subject?
 
1 - 1 of 1 Posts
Top