Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I want to change out the bulbs in the fog lights of my coupe...does the front bumper really have to come off to do this???:confused:

There is no access hatch like on the saloon.

Surely they haven't been that short sighted with the design?
 

·
Registered
Joined
·
31 Posts
fog lights

no mate on passenger side just remove part of the wheel arch liner it easy to just loosen two torx screws and move to the side change your bulb without removing the whole light unit the driver side more awkward i had to take of the wheel and the liner to get at the top torx screw then you have to go under the bumper to change bulb it more awkward but can be done
 

·
Registered
Joined
·
7 Posts
Discussion Starter #3
no mate on passenger side just remove part of the wheel arch liner it easy to just loosen two torx screws and move to the side change your bulb without removing the whole light unit the driver side more awkward i had to take of the wheel and the liner to get at the top torx screw then you have to go under the bumper to change bulb it more awkward but can be done
Thanks JD that's good news...I'll try it over the weekend and report back on how much skin was removed from my arms in the process :lol:
 
1 - 4 of 4 Posts
Top