Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
hi all,
I have read about re programming a key but still failed.
brought a used key, swapped the bits and still doesnt re programme. It's an RF type, do i need the dealer to reset something? is there something about the central locking that could be at fault?
Regards

Lee

:confused:
 

·
Registered
Joined
·
862 Posts
Is this what you tried?

1. Turn the Ignition switch to the accessory position using the key without the remote plip attached.
2. Hold the Plip key close to the central locking receiver mounted in the roof console.
3. Press the large plip button and then the small plip button on the remote.
4. Turn the ignition OFF.
5. After 5 seconds the Plip should now operate.

You usually need peugeot to re-programm the key unfortunatly.
 

·
Registered
Joined
·
8 Posts
Discussion Starter #3
Cheers

thanks for the info, have already tried that plus another variation. looks like the dealer or just put up with using the key in the lock.

cheers

Lee:thumb:
 
1 - 3 of 3 Posts
Top