Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1 (Edited)
Hi All

I have a car seat from a 406 GLX (UK) 04 plate which I am using for a out of the car racing project so need to wire up to a external power supply. I am struggling to find out what the power connections should be wired to (yellow, two browns, a red and a blue plug) as the electrical links in the sticky thread don't seem to work for me. Hunted around forumages and not managed to find the info. Only need to get the up down forward and back working.

If anyone could help I would be really appreciate it !

PS apologies if this is in the wrong place..new to this
 
G

·
Guest
Joined
·
0 Posts
Hi, you just need power to the yellow plug, this powers the switches which in turn power the motors.

The thin blue and brown are for the airbags/pre tensioners, the big brown is for the heated seat, not sure about the small red one.....
 
G

·
Guest
Joined
·
0 Posts
Its 12v, but as for the amps I wouldn't have a clue......

just stick an in-line fuse, well er, in-line....:D
 
1 - 5 of 5 Posts
Top