Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Evening,
Currently own a 307cc 180bhp 2004. Exhaust has broken at the rear box and struggling to find the correct one. After the square model with larger bore. Can only be supplied a roundbox with smaller bore. Any ideas or suggestions please?
 

·
Registered
Joined
·
12 Posts
I had an issue getting the correct back box for my 307cc. The previous owner had bodged a round back box onto it which had a sleeve connection which was too large for the centre section and so it leaked like mad (surprisingly)

When I ordered the correct back box to replace it I found that it had a cup and socket type joint - the mating half of which had obviously been sawn off the centre section to allow the wrong back box to be fitted :nono:

So I then had to buy an adaptor sleeve and a socket joint to fit to the centre section to allow the correct back box to be fitted

Hopefully your back box change will be easier than mine was!
 
1 - 4 of 4 Posts
Top