Hi all, im looking for some help here, its a 307 1.6 Rapier petrol.
It Will turn over, wont start, I cant open windows or lock doors etc due to economy mode. Red light on dash lock button is flashing rapid.
I've put brand new battery on and changed both key batteries.
Bought pp2000, bought transponder key code. Plugged in and checked the VIN code and re entered it as it was showing back to front "D's" (sort off) presumably has it had lost all information due to flat battery.
It now shows all the info correctly, Model, Builld code, Vin.
Went through process of entering code for transponder/Key. Entered the code and the screen said "Learnt" then in what appeared to still be the same screen I entered the code again as there was no F1 or F7 button to return. On entering the code again it then says not recognised. I tried several times then it locked me out for 15 mins before I could try again.
I thought that if the battery had become flat and the BSI had just lost its marbles, if it was re started and correct info put back in the old keys would still be coded. Unless of course its had this problem previously and its already had the ECU & BSI swapped over from another car.
If it has had them replaced previously (Other car with other Vin &/or codes etc) What should I try
Whats the best plan of action here, can I just erase it all and start over again.
I hope that makes sense!!! Hope you guys can help before I loose the will to live.
It Will turn over, wont start, I cant open windows or lock doors etc due to economy mode. Red light on dash lock button is flashing rapid.
I've put brand new battery on and changed both key batteries.
Bought pp2000, bought transponder key code. Plugged in and checked the VIN code and re entered it as it was showing back to front "D's" (sort off) presumably has it had lost all information due to flat battery.
It now shows all the info correctly, Model, Builld code, Vin.
Went through process of entering code for transponder/Key. Entered the code and the screen said "Learnt" then in what appeared to still be the same screen I entered the code again as there was no F1 or F7 button to return. On entering the code again it then says not recognised. I tried several times then it locked me out for 15 mins before I could try again.
I thought that if the battery had become flat and the BSI had just lost its marbles, if it was re started and correct info put back in the old keys would still be coded. Unless of course its had this problem previously and its already had the ECU & BSI swapped over from another car.
If it has had them replaced previously (Other car with other Vin &/or codes etc) What should I try
Whats the best plan of action here, can I just erase it all and start over again.
I hope that makes sense!!! Hope you guys can help before I loose the will to live.