Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi
Can someone please help me with a rear disc problem

I popped down to partco (unipart) for some new rear discs for my 307 sw2.00 HDi 110 2003
I was asked if it had abs.
I got them home (part number GBD1945) And began to fit them
I noticed after I refitted the new nut that there are about 8-10mm to big at the rear and seem to be hitting the ABS sensor,
Is there anyone that can help me find out if these are the correct parts as my wife is kicking my ass and there not open untill monday now.

If you need any more info please do message me back

Thank you
Simon
 

·
Registered
Joined
·
176 Posts
According to the Haynes manual the rear disks have the following specifications.

REAR DISK BRAKES
Disk Diameter : 247mm

Disk Thickness:
-New: 9.0mm
-Minimum : 7.0mm

Maximum Disk Run Out : 0.05mm

Brake pad friction material thickness:
-New : 11.0mm
-Minimum : 2.0mm

Have a look at this site with specified sizes, it's in Dutch (sorry) but I think you will get the idea.
http://www.winparts.nl/632/remsysteem/remschijf/0136212/remschijf-incl--lager-psa-a
http://www.winparts.nl/632/remsysteem/remschijf/0136210/remschijf-sportline-psa

PEUGEOT 307 SW (3H) | 2002.03-??? - 1.6 HDi 110
Motor: 1560ccm 109pk : 9HY (DV6TED4) (1e registratie: 2004-10-29)

According to my manual the rear disks are the same on the 1.6 and 2.0 liter HDI
 
1 - 3 of 3 Posts
Top