Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Remove MFD on 307

Hi, I have an early 2005 307......mine comes out by gently lifting the rear of MFD then you can move unit towards you. I changed bulbs with a pair of long nose pliers, saves undoing connector, cheers marcar.
 

·
Registered
Joined
·
214 Posts
Discussion Starter #3
Hi, I have an early 2005 307......mine comes out by gently lifting the rear of MFD then you can move unit towards you. I changed bulbs with a pair of long nose pliers, saves undoing connector, cheers marcar.
Thanks thats what I needed
Fix 1 of 4
How are you on suspension springs , I got a boing noise when fully loaded?
 

·
Registered
Joined
·
3 Posts
Hi Andy,
Forgot to mention, I read somewhere re MFD bulbs.....change all 3 together, I did with mine but no different. Display fades when hot which is about 80% of the time here in Spain.
Re springs, I get a "bonk" from the rear suspension when loaded [4 adults], I think it is bottoming out as it has done it from new.
I suggest you have a look through the forum, I saw something about worn ball joints etc......sorry not much help on this.
I have just started a new thread re 307 fuel gauge over reading, any ideas?
I can fix my '85 Jag but this pug is a pain!
Cheers Mark.
 
1 - 5 of 5 Posts
Top