Peugeot Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Help !!!

I've got a 307 hdi 2002 and for no apparent reason and without any warning the drivers seat just seems to slip whilst driving and just slides straight back to the end of the runner. Being only 5ft 6" as you can imagine this is quite scary when it happens cos I can barely touch the pedals when it does. Do the runners wear ? I've never heard of this before with any car I've had.

Thanks for any help and go easy with me........I'm new on here. :lol:
 

·
Registered
Joined
·
3 Posts
Runners

Hi there,

My friend has had a pug a lot longer than me, and her welding has come loose on her 51 plate... this could be the same problem.

Also my fella has a citreon Xsara (this has the same HDI Engine and the same shassis as my 307 HDI) and his is a Y reg, it also need the welding done on the drivers seat. I think it just must be wear, but once you have welded (it is the door side on both cars) it its spot on!

Ta x
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top