Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi im new here, I drive a 307 xsi 1.6 hdi 110.

The other day I got the message saying anti polloution fault and my engine management light came on. When I next went to the car these had both turned off :confused:

Ive had the car plugged in and the codes that came up were

P1447
P1351
P2408

Any help on these and how to cure them would be great :thumb:
 

·
Registered
Joined
·
3 Posts
Can't help with the fix but if you type each of the codes into Google you can find out what they mean

P1351 I know is IDM Input Circuit Malfunction Check Glow Plugs

Ben
 

·
Moderator
Joined
·
11,992 Posts
P1447 ELC system closure valve Flow fault
EDC15C2 - PEF filter pierced or differential pressure incorrect. / PEF: Particle emission filter. Clogged particle filter.

P1351 IDM input circuit Malfunction/Ignition coil control circuit High voltage
SID 803/EDC16C3 - Pre/Post heating relay circuit. Relay not controlled and glow plugs supplied.

P2408 EDC16C3 - Additive system. Fuel tank cap presence sensor.


My verdict - glow plugs not operating properly (P1351), therefore not regenerating and blocking the particulate filter (P1447), with a possible problem with the filler cap sensor.

All very common issues and well documented on here.
 
1 - 3 of 3 Posts
Top