Peugeot Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have a 307 1.4 16v (Engine Et3j4).
Last year I was getting anti polution fault, just before the mot was up I took it to a local independant garage & they got the error codes read it came back with P1153 (For MM6LP, as fitted to EW10 and ET3 engines; Check motorised throttle unit and ECU software version. ECU download often required for this fault.) Took it to the local pug garage & they replaced the cat + Put the latest software on the ecu & It then passed (only just mind).

This weekend I driving along in 1st gear without pressing the accelerator & it starts juddering (My 306 1.6 was able to do this without juddering). So I push the clutch down & watching the revs it will idle at around 1000 rpm, & every few seconds it dips to 900 rpm.

Any thoughts? What would you suggest I check? I was thingking about replaceing the Throttle Body or trying to do this throttle learing (if any one knows how to do this?)

Thanks for any advice
Graham
 

·
Registered
Joined
·
134 Posts
hi,,p1153 is a new throttle body i'm afraid,known fault.
they have been modfied,think yours may be the metal version and requires the plastic(i think from memory)
there is some marking numbers on them to confirm replacement needed.
toddy
 
1 - 3 of 3 Posts
Top